Remodelers who would like a trendy coffeehouse look in your family room or master bath or other?Orlando Real Estate, staining and sealing your concrete floor can certainly help you to achieve it. The difficulty is that it is a specialty process that not many people have carried out themselves, so it?s an uphill struggle to get quality advice on the best way to stain a concrete floor professionally.
Once you find an example of a stained concrete floor you really like, take a picture of it and take it to your nearby home improvement center or paint store. That way you can get some personal advice. You can use different types of staining methods, but this post will cover the acid stain and sealing process.
The first step is to take out any old carpet and confirm that you are happy with the condition the concrete is in. Contractors often make markings on concrete floors assuming they will be covered up, and carpet installers frequently nail down tack strips or glue down padding that can leave marks that are difficult to remove. It is possible to eliminate most of these blemishes, but there will likely be blemishes showing through the finished surface. Always remember that the attraction of stained concrete is that the variegated texture blends well with flaws, so don?t think that simply because your?Portland Real Estate?floor has issues, you can?t stain it.
Now, strip away marks and glue by scraping or with a glue solvent. It?s true that this may take some time to clean it adequately, but is well worth the time investment. Take into consideration that any solvent-based cleaning solutions will have to be washed off by using a degreasing solution (like TSP) which you can find at a hardware store. Acidic stains will need to be placed on oil- and solvent-free floors, or they won?t adequately react with the concrete.
Now fill all holes or pits in the concrete with a fast setting patch. Level out the patched area with a putting knife or trowel and smooth the patch with a wet sponge or cloth. If necessary, sand the patched area softly after it sets to remove any residue and blend the patched area with the surrounding area.
You will probably want to cover up wall surfaces from overspray at this point. If you?ve applied any solvent-based cleaning products, clean the area with a degreasing solution and rinse thoroughly. Use a shop vacuum to get rid of extra water if necessary
You?re finally prepared for your acid stain on your?Idaho Real Estate. Follow the guidelines of the manufacturer, but ordinarily this entails transferring the liquid into a plastic pump sprayer. Dampen the surface lightly and begin applying the product over the concrete, working your way to the door so you never have to step on completed sections. It?s OK to allow the product to pool into the low spots of the floor; this is how you get an amazing leather-like appearance.
The acid component of the stain reacts with the concrete and you?ll see some bubbling while you apply the stain. You can normally let the stain dry for up to twenty four hours so the concrete gets a rich coloration, then scrub it off with a baking soda solution to neutralize the acid. Wash the concrete thoroughly, getting rid of the water with a shop vac or sponge mop as necessary.
You will realize that the floor looked a lot more attractive when it was wet. When the floor is entirely dried, which might take a day or two with blowers on it, you must roll on a sealer to restore the ?wet-look? of the floor. Water-based sealer is more affordable and will be satisfactory if you don?t desire a high-gloss finish. However, if you want gloss, go ahead and pay a little extra for a solvent-based concrete sealer. Note: Do not, under any circumstance, use the water-based sealer first, then change your mind and move to a solvent-based sealer. Even if the first product is completely dry, the solvent-based sealer won?t adhere well and you?ll have difficulties with durability.
In our opinion, the high gloss sealer looks considerably more attractive and is worth the extra cost to do it right. The sealer gets applied with a brush around the edges and a roller over the rest of the floor. You may apply a second coat if you wish, then you are finished. You should now be the proud owner of a beautiful stained concrete floor!
Filed Under: Featured
Source: http://dunesparadise.com/tips-on-staining-your-concrete-floor
kate walsh mastectomy courageous courageous space junk space junk gary johnson
No comments:
Post a Comment